The alternative that completes the picture, data transmission via radio and much more
MODIN is the transmitter to be installed on DIN-rails inside the electrical panel and which provides the user with input terminal blocks for digital, analog and serial commands. It is used in many sectors that prefer the radio transmission of signals coming from sensors, limit switches, PLCs and CAN-BUS, RS232 and RS485 ports, or for sending commands from joysticks, buttons, selectors, potentiometers, emergency stop, or as an alternative to avoid long or difficult cabling.
Prototyping and series production
IMET supports Manufacturers and System Integrators in the customization of the product, based on the needs of their application. IMET makes prototypes and pre-series. Once the specifications are defined, the customer plans the supplies. The technology and installations on which IMET has invested allow a large and diversified production capacity, thus ensuring product repeatability in times that are appropriate to customer needs.
With a view to sustainability and preservation over time, they are made of high-quality materials and components. IMET remote controls are designed for use in the most extreme environments. To ensure durability, the products are tested internally with instruments that verify the degree of protection from penetration of liquids and dust, aging with climate tests, UV light, salt spray and incandescent wire.
Repairable over time
Durable and repairable, this is the perspective on which IMET products are designed, all in function of a paradigm of environmental sustainability and cost reduction. There’s certainty of spare parts supplies over time, also for systems at the end of lifecycle, thanks to a structured and well-stocked warehouse.
IMET remote controls having physical outputs and depending on quantity, can be equipped with complex operating logic, developed according to manufacturer’s specifications. Our Technical Department, thanks to the know-how acquired in decades of experience in every sector, is capable of following you in every step of development.
Programming and diagnostic
Through a dedicated software (sold separately), you can set-up some parameters of the system. The programming tool acts as an interface to the PC. This device allows the reading of any diagnostic information about the system operation.
Certificazione IC (Canada)
Certificazione FCC (USA)
Certificazione MIC (Giappone)
Certificazione KCC (Korea)
Certificazione ACMA (Australia)
|Dimensions (L.W.A.)||180 x 120 x 73 mm / 7.08 x 4.72 x 2.87 in|
|Weight (battery included)||900 g max / 1,98 lb|
|Max number of ON/OFF commands||24|
|Max number of analog commands (optional)||8|
|Range||100 m / 330 ft|
|Casing material||Nylon charged UL94 HB|
|Operating frequency 1||I.S.M. Band 433.050-434.790 MHz 69 programmable channels in AFA mode or on fixed channel. Max power: 1 mW e.r.p|
|Operating frequency 2||I.S.M. 434.040-434.790 MHz 30 programmable channels in AFA mode or on fixed channel. Max power: 10 mW e.r.p|
|Operating frequency 3||2,4 GHz 38 ch. Max power: 10 mW e.r.p|
|Operating temperature||-40°C +80°C / -40°F +176°F|
|Degree of protection||IP 20|