Fields of application
Drilling machines
Tunneling boring machines (TBM)
Forestry machinery
Others

Prototyping and series production

IMET supports Manufacturers and System Integrators in the customization of the product, based on the needs of their application. IMET makes prototypes and pre-series. Once the specifications are defined, the customer plans the supplies. The technology and installations on which IMET has invested allow a large and diversified production capacity, thus ensuring product repeatability in times that are appropriate to customer needs.

Total configurability

The CNC drilling of the boxes and the multi-colored digital printing and cutting of the panels are realized internally. Together with an extremely dynamic Technical Office, IMET can meet the most varied needs of manufacturers. The positioning of the components and the symbology are fully customizable.

Durability

With a view to sustainability and preservation over time, they are made of high-quality materials and components. IMET remote controls are designed for use in the most extreme environments. To ensure durability, the products are tested internally with instruments that verify the degree of protection from penetration of liquids and dust, aging with climate tests, UV light, salt spray and incandescent wire.

Repairable over time

Durable and repairable, this is the perspective on which IMET products are designed, all in function of a paradigm of environmental sustainability and cost reduction. There’s certainty of spare parts supplies over time, also for systems at the end of lifecycle, thanks to a structured and well-stocked warehouse.

Operating logic

IMET remote controls having physical outputs and depending on quantity, can be equipped with complex operating logic, developed according to manufacturer’s specifications. Our Technical Department, thanks to the know-how acquired in decades of experience in every sector, is capable of following you in every step of development.

Programming and diagnostic

Through a dedicated software (sold separately), you can set-up some parameters of the system. The programming tool acts as an interface to the PC. This device allows the reading of any diagnostic information about the system operation.

Harsh environments

The remote controls are designed and built to be used in the most demanding environments. In order to ensure the durability, the products are tested internally with instrumentation and systems that check infiltration, aging, salt spray, UV, fire; only to mention some.

4.3" Color Display

4.3" graphic color display, 65,000 colors and 800-nit brightness. It allows a neat and clear display of information even in environments with intense sunlight. It is easily programmable and upgradeable by the customer via USB by means of a dedicated software.

Display according to customer specifications

The 3.5" and 2.8" display is a great compromise wherever LED feedback is no longer enough. The display is programmed and prepared by IMET according to the needs and requests of the customer (for example: load cells, distance of the trolley from the tower, lifting cable length, wind speed, etc.).

Monoaxial Joystick

The product designed in IMET with unique characteristics for the market. Based on optical reading technology, it is free of mobile electrical parts. Tested for 15,000,000 maneuvers and equipped with a +/-40 rotation angle, it guarantees precision and tactile sensitivity. UMFS protection up to PL d Cat. 3. Available in two versions: inclined lever or straight lever. It can also be used in mixed configurations to simplify the identification of maneuvers.

Biaxial Joystick

Thanks to the optical reading technology conceived by IMET, our biaxial joysticks guarantee the operator surgical precision and a tactile control feeling of the objects being moved. Tested for 15,000,000 maneuvers and equipped with a travel angle of up to +/-40". Protection UMFS up to PL d Cat. 3. The range covers every need: stepless proportional joysticks, step joysticks, with interlocked axes, with button of various colors.

Triaxial Joystick

Always using optical reading technology, the IMET triaxial joystick allows you to have in one hand three proportional functions simultaneously. UMFS protection up to PL d Cat. 3.

Biaxial stick joystick

A safe handgrip during operations requiring precision movements. The large grip can also be equipped with buttons that can be activated without letting go the joystick.

Removable battery

Long-lasting rechargeable Li-Po or Ni-MH batteries allow continuous operation and a negligible memory effect. They are easily removable thanks to the quick coupling and are protected from any of liquid and powder penetration. Gold-plated contacts ensure stability and long service life.
Certificazione CE

Certificazione CE

Certificazione ACMA

Certificazione ACMA (Australia)

Certificazione MIC

Certificazione MIC (Giappone)

Certificazione FCC

Certificazione FCC (USA)

Certificazione IC

Certificazione IC (Canada)

Certificazione KCC

Certificazione KCC (Korea)

Certificazione EAC

Certificazione EAC

TITAN
Dimensions (L.W.A.)400 x 230 x 170 mm / 15.7 x 9.05 x 6.7 in
Weight (battery included)from 3 to 4,5 kg / 6,61 x 9,92 lb depends on the configuration
Max number of ON/OFF commands64
Max number of analog commands (optional)30
Max number of single-axis joysticks30
Max number of dual-axis joysticks8
Range100 m / 330 ft
Casing materialCharged Nylon UL94 HB
BatteryNiMh 2,4V - 4,3 Ah
Autonomy at 20°C with charged battery in continuous service≃ 14 hours
UMFS protection
STOPPLe Cat.4/SIL3
JOYSTICKPLd Cat.3/SIL3
SELECTOR LEVER - BUTTONPLc Cat.2/SIL2
Operating frequency 1I.S.M. Band 433.050-434.790 MHz 69 programmable channels in AFA mode or on fixed channel. Max power: 1 mW e.r.p
Operating frequency 2I.S.M. 434.040-434.790 MHz 30 programmable channels in AFA mode or on fixed channel. Max power: 10 mW e.r.p
Operating frequency 32,4 GHz 38 ch. Max power: 10 mW e.r.p
Color graphic display (optionals)4,3"
Operating temperature-25°C +55°C / -13°F +133°F
Degree of protectionIP 65
Empfänger für Fernbedienungen für industrielle Anwendungen
Receiver Receiver S DC Discover more
Empfänger für Fernbedienungen für industrielle Anwendungen
Receiver Receiver S AC Discover more
Empfänger für Fernbedienungen für industrielle Anwendungen
Receiver Receiver L DC Discover more
Ricevente L IMET
Receiver Receiver L AC Discover more
Empfänger für Fernbedienungen für industrielle Anwendungen
Receiver Receiver H DC Discover more
Empfänger für Fernbedienungen für industrielle Anwendungen
Receiver Receiver H AC Discover more
Empfänger für Fernbedienungen für industrielle Anwendungen
Receiver Receiver M AC Discover more
Additional optionals

Serial cable

For systems used in environments where radio frequency is not allowed or in emergency situations where batteries are not available. By means of a cable connection between transmitter and receiver, the transmission via radio is temporarily excluded and the transmitter is fed directly from the receiver unit.

Kapta

KAPTA allows the operator to make unlimited and rapid pairings between transmitting and receiving units, without the need of opening the devices. It always ensures exclusive control of the machine to a single operator.

TWINB (double battery)

TWIN B consists of a double battery holder: this system not only increases the autonomy of the transmitter, but also allows the battery change during the working phases. No need to stop the machine for a battery change!

RTAS Real Time Analog Setup

RTAS is a technology that allows the calibration of proportional outputs directly from the transmitting unit. Following the relevant procedure, which is protected by an access code, it is possible to vary the minimum and the maximum limits for each movement of the machine.

Multi receiving and/or multi transmitting optional

MTRS allows a transmitter to communicate simultaneously with multiple receivers, also with data-feedback, and to pass the exclusive control of a receiver to other transmitters through a secure Lock and Unlock procedure.

Tilt Sensor

TILT SENSOR secures the system if the transmitter is in an abnormal position or accidentally falls to the ground.

DSC Dynamic Speed Control

Precision and safety in movements are fundamental in the performance of the job. The DSC feature allows to vary in real-time and in a continuous way, the speed of the machine movements, until obtaining the desired accuracy.
Kabel für Industriefernbedienungen
Manipulator für industrielle Anwendungen
Bauteile für Fernbedienungen für industrielle Anwendungen
RTAS
MTRS_IMET_radiocomandi_industriali
TiltSensor
DSC
Request more information Choose the contact form according to your needs and fill in all the fields, one of our representatives will reply as soon as possible
Assistance
Spare Parts
Information