Electric overhead travelling (EOT) cranes
Sewer vacuum pumps
Recovery and tow vehicles
Crushers and screeners
Cableways rope cranes
Concrete mixing plants
Ship and marine cranes
Prototyping and series production
IMET supports Manufacturers and System Integrators in the customization of the product, based on the needs of their application. IMET makes prototypes and pre-series. Once the specifications are defined, the customer plans the supplies. The technology and installations on which IMET has invested allow a large and diversified production capacity, thus ensuring product repeatability in times that are appropriate to customer needs.
With a view to sustainability and preservation over time, they are made of high-quality materials and components. IMET remote controls are designed for use in the most extreme environments. To ensure durability, the products are tested internally with instruments that verify the degree of protection from penetration of liquids and dust, aging with climate tests, UV light, salt spray and incandescent wire.
Repairable over time
Durable and repairable, this is the perspective on which IMET products are designed, all in function of a paradigm of environmental sustainability and cost reduction. There’s certainty of spare parts supplies over time, also for systems at the end of lifecycle, thanks to a structured and well-stocked warehouse.
IMET remote controls having physical outputs and depending on quantity, can be equipped with complex operating logic, developed according to manufacturer’s specifications. Our Technical Department, thanks to the know-how acquired in decades of experience in every sector, is capable of following you in every step of development.
Programming and diagnostic
Through a dedicated software (sold separately), you can set-up some parameters of the system. The programming tool acts as an interface to the PC. This device allows the reading of any diagnostic information about the system operation.
The remote controls are designed and built to be used in the most demanding environments. In order to ensure the durability, the products are tested internally with instrumentation and systems that check infiltration, aging, salt spray, UV, fire; only to mention some.
Custom button symbols
The symbology of the buttons is fully customizable. We have a symbol library for standard applications. Special requests are easily transformed into a finished product thanks to internal production and an extremely dynamic Technical Office.
Long-lasting rechargeable Li-Po or Ni-MH batteries allow continuous operation and a negligible memory effect. They are easily removable thanks to the quick coupling and are protected from any of liquid and powder penetration. Gold-plated contacts ensure stability and long service life.
|Dimensions (L.W.A.)||72 x 42 x 190 mm / 2.83 x 1.65 x 7.48 in|
|Weight (battery included)||235 g max / 0,51 lb|
|Max number of ON/OFF commands||32|
|Max number of analog commands (optional)||4|
|Range||100 m / 330 ft|
|Casing material||Charged Nylon UL94 HB|
|Battery||Lipo 3,7 2Ah|
|Autonomy at 20°C with charged battery in continuous service||≃ 23 hours|
|Operating frequency 1||I.S.M. Band 433.050-434.790 MHz 69 programmable channels in AFA mode or on fixed channel. Max power: 1 mW e.r.p|
|Operating frequency 2||I.S.M. 434.040-434.790 MHz 30 programmable channels in AFA mode or on fixed channel. Max power: 10 mW e.r.p|
|Operating frequency 3||2,4 GHz 38 ch. Max power: 10 mW e.r.p|
|Monochromatic display (optionals)||1,5"|
|Operating temperature||-25°C +55°C / -13°F +133°F|
|Degree of protection||IP 65|
Multi receiving and/or multi transmitting optional