Fields of application
Drilling machines
Forklifters loaders
Travel lift
Demolition
Excavators
Trenching machines
Harvesting machines
Tracked machines
Others

Automatic Frequency Agility (AFA)

As it is based on "AFA" technology, (Adaptive Frequency Agility), it avoids manual frequencies changes. The radio remote control continuously searches and selects the less impeded channel among the available ones.

DSC function

The DSC function (Dynamic Speed Control) executes speed corrections in real time (in "slow" mode), thus allowing the operator to better master the micromotions caused by the characteristics of the relevant loads on the crane.

R.T.A.S. radio calibration

The response behaviour of the single joysticks may be calibrated directly via radio, thus customising the speed of all crane motions (access protected by PIN code).

Event log

IMET radio remote controls memorize all events that may have led to failures or unexpected stops, as well as the device operating hours.

PIN Code: Always in safe hands

The new IMET range of radio remote controls allows you to set a customizable safety PIN code, so that the device can only be used by authorized personnel. This is yet another proof of how IMET designs and develops its products with extreme attention to details.

STOP button: safety is always paramount

The new self-locking button with double reset system ensures maximum safety, in accordance with the European and international safety standards, as well as an uncomparable ease of use. While it is perfectly protected against unintentional collisions, the STOP button is easily accessible and can be quickly operated with priority.

IMET single-axis joysticks: powerful and accurate

This unique product brings together accuracy and comfort. It was tested for 15,000,000 operations and offers an incline angle of +/-40° - and these are just some of the great features of this incredible product designed and developed by IMET based on the "OPTICAL SENSE" technology.

IMET dual-axis joysticks: now you have total control!

Forget the expensive maintenance costs of traditional sliding contact joysticks! Thanks to the contactless sensing technology, IMET dual-axis joysticks guarantee a long-life and maintenance-free operation providing superb proportional and step control, and will allow smooth and precise control of handling operations throughout the life cycle of your controller. Our range of solutions will cover all your needs: stepless proportional joysticks, one-step or multi-step joysticks (up to 5 steps for each axis).

Selection and motion controls: maximum comfort at work

IMET presents a wide range of selectors, buttons, switches and potentiometers that can meet every possible demand in terms of customisation. These components are extremely handy and suitable for long work shifts, even for operators wearing gloves.

Control panel: we turn your ideas into reality

Using the advance technology of digital print, IMET is now able to customise markings according to your needs. For more complex configurations, multi-colour solutions allow the operator to identify quickly the various control units, thereby preventing errors or inadvertent activations.

Status LEDs: A little big help

All transmitting units of IMET radio remote controls are equipped with LED lights that signal operating status, battery level and fault messages.

Ergonomic belt

The convenient belt attachment allows the operator to have their hands completely free, and hence manage easily the loading and unloading operations on the crane.

Ergonomics: Functionality goes hand-in-hand with design

We pay utmost attention to details in order to provide ergonomic and functional products. This leads to small-size, lightweight transmitting units that allow for greater freedom of movement and a more comfortable and safe hand-grip, even in case of long work sessions.

Materials: No environment is too harsh

IMET radio remote control housings are made of synthetic compounds that are compliant with the RoHS standard and able to ensure maximum performance in terms of robustness, mechanical and thermal stability (with operating temperatures from -25°C to +55°C), as well as resistance to aggressive chemicals exposure. Moreover, these materials are free from hazardous substances, fully recyclable and hence, environmentally friendly.

New removable and rechargeable NiMH batteries: more energy, no pollution

Up to 22 hours of continuous operation! Compared with the previous batteries, the new NiMH generation ensures more autonomy and a negligible memory effect. The transmitter is equipped with an easily accessible battery slot that enables its fast replacement while ensuring a perfect sealing against liquids. Gold-plated contacts guarantee a long-term, stable electrical connection.
THOR2
Dimensions (L.W.A.)295 x 180 x 160 mm
Weight (battery included)2300 g max
Max number of ON/OFF commands56
Max number of analog commands (optional)16
Max number of single-axis joysticks9
Max number of dual-axis joysticks4
Range100 m
Casing materialCharged Nylon UL94 HB
BatteryNiMh 1,2V - 4300 mAh
Autonomy at 20°C with charged battery in continuous service≃ 22 hours
UMFS protection
STOPPLe Cat.4/SIL3
JOYSTICKPLd Cat.3/SIL3
SELECTOR LEVER - BUTTONPLc Cat.2/SIL2
Operating frequency 1I.S.M. Band 433.050-434.790 MHz 69 programmable channels in AFA mode or on fixed channel. Max power: 1 mW e.r.p
Operating frequency 2I.S.M. 434.040-434.790 MHz 30 programmable channels in AFA mode or on fixed channel. Max power: 10 mW e.r.p
Operating frequency 32,4 GHz 38 ch. Potenza massima: 10 mW e.r.p
Monochromatic display (optionals)3,5"
Color graphic display (optionals)4,3"
Operating temperature-25°C - +55°C
Degree of protectionIP 65
Receiver Receiver S DC Discover more
Receiver Receiver S AC Discover more
Receiver Receiver L DC Discover more
Ricevente L IMET
Receiver Receiver L AC Discover more
Receiver Receiver H DC Discover more
Receiver Receiver H AC Discover more
Receiver Receiving ATEX Discover more
Receiver Receiver M AC Discover more
Additional optionals

Serial cable

For systems used in environments where radio frequency is not allowed or in emergency situations where batteries are not available. By means of a cable connection between transmitter and receiver, the transmission via radio is temporarily excluded and the transmitter is fed directly from the receiver unit.
Discover more

Kapta

KAPTA allows the operator to make unlimited and rapid pairings between transmitting and receiving units, without the need of opening the devices. It always ensures exclusive control of the machine to a single operator.
Discover more

TWINB (double battery)

TWIN B consists of a double housing for two batteries: this system not only increases the autonomy of the transmitter, but also allows the battery change during the working phases. No need to stop the machine for a battery change!
Discover more

Multi receiving and/or multi transmitting optional

MTRS allows a transmitter to communicate simultaneously with multiple receivers, also with data-feedback, and to pass the exclusive control of a receiver to other transmitters through a secure Lock and Unlock procedure.
Discover more

RTAS Real Time Analog Setup

RTAS is a technology that allows the calibration of proportional outputs directly from the transmitting unit. Following the relevant procedure, which is protected by an access code, it is possible to vary the minimum and the maximum limits for each movement of the machine.
Discover more

Tilt Sensor

TILT SENSOR secures the system if the transmitter is in an abnormal position or accidentally falls to the ground.
Discover more

DSC Dynamic Speed Control

Precision and safety in movements are fundamental in the performance of the job. The DSC feature allows to vary in real-time and in a continuous way, the speed of the machine movements, until obtaining the desired accuracy.
Discover more
Zeus2_SerialCable
Kapta-Zeus2
TwinB
MTRS_IMET_radiocomandi_industriali
RTAS
TiltSensor
DSC
Request more information

Fill in all the fields of the form below, one of our representatives will reply as soon as possible