Home / Shop / WAVE2 S8

WAVE2 S8

Transmitters
funksteuerungen
Fernbedienung WAVE2 S für industrielle Funksteuerungen
funksteuerungen 1/2
Fernbedienung WAVE2 S für industrielle Funksteuerungen 2/2

Standardly equipped with ON/OFF controls, configuration with 8 two-step buttons, status and feedback LEDs for the control of machinery and systems of various types. It allows a safe and continuous use thanks to the long-lasting battery. It has “AFA” technology (Adaptive Frequency Agility).

Download PDF sheet Request a quote
Optionals Receivers
Fields of application
Dust fighters
Sewer vacuum pumps
Forklifters loaders
Recovery and tow vehicles
Electric overhead travelling (EOT) cranes
Concrete mixing plants
Tracked machines
Crushers and screeners
Tower cranes
Harvesting machines
Trenching machines
Tunneling boring machines (TBM)
Forestry machinery
Yacht/boat mooring
Hoist winches
Drilling machines
Cableways rope cranes
Others

No limits of application!

IMET supports Manufacturers and System Integrators in customizing products according to the needs of their applications. Prototypes and pilot series are created. Once the specifications are defined, the customer plans the supplies. The technology and systems that IMET has invested in enable a large and diversified production capacity, ensuring product repeatability within timelines that meet the customer's needs.

Durability

With a focus on sustainability and long-term preservation, we use high-quality materials and components. IMET radio controls are designed to be used in the most extreme environments. To ensure durability, the products are tested internally with instruments that verify the protection level against liquid and dust penetration, aging through climatic tests, UV light, salt mist, and incandescent wire tests.

Repairable over time

Durable and repairable, this is the perspective on which IMET products are designed, all in function of a paradigm of environmental sustainability and cost reduction. There’s certainty of spare parts supplies over time, also for systems at the end of lifecycle, thanks to a structured and well-stocked warehouse.

Operating logic

IMET remote controls having physical outputs and depending on quantity, can be equipped with complex operating logic, developed according to manufacturer’s specifications. Our Technical Department, thanks to the know-how acquired in decades of experience in every sector, is capable of following you in every step of development.

Programming and diagnostic

Through a dedicated software (sold separately), you can set-up some parameters of the system. The programming tool acts as an interface to the PC. This device allows the reading of any diagnostic information about the system operation.

Harsh environments

The remote controls are designed and built to be used in the most demanding environments. In order to ensure the durability, the products are tested internally with instrumentation and systems that check infiltration, aging, salt spray, UV, fire; only to mention some.

Custom button symbols

The symbology of the buttons is fully customizable. We have a symbol library for standard applications. Special requests are easily transformed into a finished product thanks to internal production and an extremely dynamic Technical Office.

Removable battery

Long-lasting rechargeable Li-Po or Ni-MH batteries allow continuous operation and a negligible memory effect. They are easily removable thanks to the quick coupling and are protected from any of liquid and powder penetration. Gold-plated contacts ensure stability and long service life.
Certificazione CE
CE certification

CE certification

Certificazione-UKCA
UKCA (United Kingdom) certification

UKCA (United Kingdom) certification

Certificazione IC
IC certification

IC (Canada) certification

Certificazione FCC
FCC certification

FCC (USA) certification

Certificazione MIC
MIC certification

MIC (Japan) certification

Certificazione KCC
KCC certification

KCC (Korea) certification

Certificazione EAC
EAC certification

EAC certification

Certificazione ACMA
ACMA certification

ACMA (Australia) certification

WAVE2 S
Dimensions (L.W.A.)72 x 42 x 190 mm
Weight (battery included)235 g max
Max number of ON/OFF commands32
Max number of analog commands (optional)4
Max number of single-axis joysticks/
Max number of dual-axis joysticks/
Range100 m
Casing materialCharged Nylon UL94 HB
BatteryNiMh 1,2V - 4300 mAh
Autonomy at 20°C with charged battery in continuous service≃ 23 hours
UMFS protection
STOPPLe Cat.4
STOP WITHOUT MUSHROOM BUTTONPLc Cat.1
JOYSTICKPLd Cat.3
SELECTOR LEVER - BUTTONPLc Cat.2
Operating frequency 1I.S.M. Band 433.050-434.790 MHz 69 programmable channels in AFA mode or on fixed channel. Max power: 1 mW e.r.p
Operating frequency 2I.S.M. 434.040-434.790 MHz 30 programmable channels in AFA mode or on fixed channel. Max power: 10 mW e.r.p
Operating frequency 32,4 GHz 38 ch
Operating frequency 4I.S.M. Band 863.100-869.850 MHz Number of programmable channels: 32 AFA mode (Adaptive Frequency Agility) + LBT with automatic channel selection. Max power: 20 mW e.r.p
Operating frequency 5Band 915.200-927.800 MHz Number of programmable channels: 64 Frequency Hopping mode. Max power: 20 mW e.r.p
Monochromatic display (optionals)1,5"
Color graphic display (optionals)/
Operating temperature-25°C - +55°C
Degree of protectionIP 65
Empfänger für Fernbedienungen für industrielle Anwendungen
Receiver Receiver S DC Discover more
Empfänger für Fernbedienungen für industrielle Anwendungen
Receiver Receiver S AC Discover more
Empfänger für Fernbedienungen für industrielle Anwendungen
Receiver Receiver L DC Discover more
Ricevente L IMET
Receiver Receiver L AC Discover more
Empfänger für Fernbedienungen für industrielle Anwendungen
Receiver Receiver H DC Discover more
Empfänger für Fernbedienungen für industrielle Anwendungen
Receiver Receiver H AC Discover more
Empfänger für Fernbedienungen für industrielle Anwendungen
Receiver Receiving unit Explosion proof Discover more
Empfänger für Fernbedienungen für industrielle Anwendungen
Receiver Receiver M AC Discover more
Additional optionals

Illuminator

The Illuminator option (torch) allows you to see buttons and symbology in low light or low visibility situations.

Kapta

KAPTA allows the operator to make unlimited and rapid pairings between transmitting and receiving units, without the need of opening the devices. It always ensures exclusive control of the machine to a single operator.

Multi receiving and/or multi transmitting optional

MTRS allows a transmitter to communicate simultaneously with multiple receivers, also with data-feedback, and to pass the exclusive control of a receiver to other transmitters through a secure Lock and Unlock procedure.

iReady

iREADY is a technology that allows you to activate the radio remote control system only if the transmitter is oriented towards a dedicated infrared receiver and positioned at a desired point within a range of distance.
Fernbedienung Wave2 für industrielle Funksteuerungen
Manipulator für industrielle Anwendungen
MTRS_IMET_radiocomandi_industriali
iReady
Related Products
funksteuerungen WAVE2_L10_D

WAVE2 L10 DM

Transmitters
Discover more
Fernbedienung Wave2 L10D

WAVE2 L10

Transmitters
Discover more
funksteuerungen WAVE2_L12

WAVE2 L12

Transmitters
Discover more
funksteuerungen WAVE2_S6_D

WAVE2 S6 DM

Transmitters
Discover more
Fernbedienung Wave2 S6D

WAVE2 S6

Transmitters
Discover more
Fernbedienung Ray CP

RAY CP

Transmitters
Discover more
Fernbedienung Ray CP

RAY EP

Transmitters
Discover more
Request more information Choose the contact form according to your needs and fill in all the fields, one of our representatives will reply as soon as possible
Assistance
Spare Parts
Information